$0 Call Out
available now
We are currently open!
available now
We are currently open!
When there’s a burst pipe in the home, every minute counts. A single flexi-hose can leak up to 1,500 litres of water per hour – enough to cause serious damage to your home. According to QBE Insurance claims data, burst pipes are the leading cause of water damage in the home, accounting for 46% of all water damage claims.
Dial Up Plumbing responds to burst pipe emergencies 24/7 across Sydney. We understand the urgency of a burst pipe – our plumbers will isolate the water supply on arrival, locate the fault using thermal and acoustic detection, and carry out a long-lasting repair on the same day.
“Chris came in on time and done very good job. We highly recommend him.”
“Same day friendly excellence! Charlie did the initial check and advised if it was an easy repair...
“I was impressed with the prompt service I received from this plumbing company. When I called for an urge...
“Outstanding plumbing service! Chris was incredibly professional, punctual, and thorough. He quickly...
“Excellent, prompt service!! Always on time, professional and extremely efficient for solving and fixing those...
Call Dial Up Plumbing on 02 8999 3781 – tell us what’s happening and where. Burst pipe calls are treated as emergencies and we’ll get a plumber to your property the same day.
Our plumber arrives and will immediately isolate the water supply to the burst line to stop ongoing flooding and limit damage to walls, floors, and cabinetry.
Using thermal imaging and acoustic detection equipment, we find exactly where the pipe has burst (typically inside walls, under slabs, and beneath flooring) without opening up areas we don’t need to.
We will remove and replace the broken section, usually a flexi-hose, corroded pipe, or ruptured joint. We can work with all types of pipes including copper, galvanised, plastic, polyethylene, Hepworth, brass, Rehau, Auspex, and Pro-fit pipes.
Before we finish the job e pressure test the repaired pipe to confirm the system is watertight, restore the water supply. We can hand over a written report with documentation to support an insurance claim if you need.
Pipes will burst from corrosion, sustained high pressure, deteriorating joints, or ageing materials. Whatever the cause, we’re available 24/7 to isolate the water supply, locate the fault, and carry out a permanent repair on the same day.
Flexi-hoses are the braided connectors under sinks, behind toilets, and connecting appliances. Flexi connectors are the leading cause of internal flooding in Australian homes and need replacing every ~10 years.
We use thermal imaging cameras and acoustic sensors to locate the source of a burst or leak without unnecessary damage to walls, floors, or foundations, including pipes inside walls and under slabs.
Where a section of pipe has failed due to corrosion, pressure, or physical damage, we remove it and replace with new fittings and pipework that meet Australian Standards (AS3500).
If a pipe has failed near an obstacle (tree root, a driveway, or a structural element) we reroute new pipework around it rather than repeatedly repairing the same location.
One of the main causes for pipe bursts is high water pressure. We pressure test the system to confirm it is running within manufacturer specifications, which can be relevant for warranty and insurance.
Pipes will burst from corrosion, sustained high pressure, deteriorating joints, or ageing materials. Whatever the cause, we’re available 24/7 to isolate the water supply, locate the fault, and carry out a permanent repair on the same day.
Flexi-hoses are the braided connectors under sinks, behind toilets, and connecting appliances. Flexi connectors are the leading cause of internal flooding in Australian homes and need replacing every ~10 years.
We use thermal imaging cameras and acoustic sensors to locate the source of a burst or leak without unnecessary damage to walls, floors, or foundations, including pipes inside walls and under slabs.
Where a section of pipe has failed due to corrosion, pressure, or physical damage, we remove it and replace with new fittings and pipework that meet Australian Standards (AS3500).
If a pipe has failed near an obstacle (tree root, a driveway, or a structural element) we reroute new pipework around it rather than repeatedly repairing the same location.
One of the main causes for pipe bursts is high water pressure. We pressure test the system to confirm it is running within manufacturer specifications, which can be relevant for warranty and insurance.
Burst pipes can be caused by ageing pipework, corrosion, tree root intrusion, ground movement, high water pressure, poor installation, or accidental damage during construction work. Identifying the cause is important to prevent the issue from happening again.
Yes. A burst pipe can release large amounts of water in a short period, causing significant damage to your home or property. If you suspect a burst pipe, it’s important to turn off your water supply and contact an emergency plumber as soon as possible.
Our plumbers use a combination of visual inspections, pressure testing, acoustic listening equipment, and leak detection technology to accurately locate burst pipes while minimising disruption to your property.
In many cases, yes. Depending on the location and condition of the pipe, a plumber may be able to repair only the damaged section. If the pipe is severely deteriorated or multiple failures are likely, a full pipe replacement may be the most cost-effective long-term solution.
